Home
>
Product Catalogue 
Material Safety Data Sheet-Secondary Butyl Benzene
Raw material for Perfumery compounds. Chain transfer agent for Polystyrene.
Common name Sec Butyl Benzene Chemical Name 1-Methyl Propyl Benzene Molecular Weight 134.21 Form Liquid Boiling Point 174°C Purity 99%, minimum Density at 20°C 0.86 Refractive Index at 20°C 1.49 Flash Point 52°C Solubility Insoluble in water, miscible with alcohol, ether, benzene.
Material Safety Data Sheet-Secondary Butyl Benzene
SECTION - 1 : MATERIAL IDENTIFICATION & USE
Chemical Name 2 Phenyl Butane Material Name Identifier Sec Butyl Benzene
Trade Name and synonyms SBB U.N. Number 2709 Product use Perfumery Intermediate Manufacturers K. K. POONJA & SONS Street Address 1422, IIIrd Phase, G.I.D.C. Estate City/State VAPI . Gujarat Postal Code 396 195 Phone No 91-02638-32276 SECTION - II : HAZARDOUS INGREDIENTS OF MATERIAL
Hazardous Ingredients Itself
LD-50 2240 mg/kg oral-rat Approx. Concentration Above 95%. SECTION-III: PHYSICAL DATA FOR MATERIAL
Physical State Colourless Liquid
Density 0.86 Boiling point 174°C Solubility in water at 25°C Insoluble Vapour Density 4.62 SECTION-IV: FIRE & EXPLOSION HAZARD OF MATERIAL
Flash Point 52 °C
Means of extinction Foam, Carbon Dioxide, Dry Chemical Upper explosive limit(by volume) 6.8% Lower explosive limit(by volume) 0.8% SECTION-V: REACTIVITY DATA
Chemical stability N.A Reactive and under what conditions N.A Incompatibility to other substances N.A Hazardous products of decomposition Itself SECTION-VI: TOXICOLOGICAL PROPERTIES OF MATERIAL
Route of entry Inhalation, Ingestion Effects of chronic exposure of materials Possible Kidney Damage Effects of acute exposure to material Depression of CNS, Eye and Respiratory system irritation Exposure limit Not specified Effect on Skin & Eye Skin and eye irritant SECTION-VII : PREVENTIVE MEASURES
Gloves (Specify) PVC Eyes (Specify) Safety Goggles Clothing(Specify) Overalls Footwear (Specify) Protective footwear Others(Specify) PVC overall with hood and visor Engineering Controls Effective, Ventilation. No physical contact Leak & spill containment procedures recommended X Waste disposal procedures X Special shipping information X Storage requirement Cool, dry place with ventilation SECTION-X: FIRST AID MEASURE
First aid measures Inhalation - rest. If swallowed, get medical attention; wash from skin and eyes. The material contained is given in good faith and is accurate to the best of our knowledge. K.K. Poonja & Sons do not assume any liability for the information contained herein.
