Home
>
Product Catalogue 
Material Safety Data Sheet-Para-Tertiary Butyl Toulene
P-Tert Butyl Toulene
Common name P-Tert Butyl Toulene
Chemical Name Para Tert Butyl Toluene Molecular Weight x Appearance Clear colourless liquid Boiling Point 189 - 192 °C Purity N.L.T 92 % Density at 25/25°C 0.853 Refractive Index at 20°C 1.4915 Flash Point 52°C Solubility Insoluble in water, miscible with alcohol, ether, benzene. For further information please contact our office in Mumbai.
Material Safety Data Sheet-Para-Tertiary Butyl Toulene
SECTION - 1 : MATERIAL IDENTIFICATION & USE
Material Name Identifier 4-Tert Butyl Toluene
Trade Name and synonyms P-TBT CAS Number 98-51-1 U.N. Number 2667 Product use Pharmaceutical Intermediate Manufacturers K. K. POONJA & SONS Street Address 1422, IIIrd Phase, G.I.D.C. Estate City/State VAPI . Gujarat Postal Code 396 195 Phone No 91-02638-32276 SECTION - II : INGREDIENTS OF MATERIAL
Hazardous Ingredients Itself , Catechol
LD-50 778 mg/kg oral-rat SECTION-III: PHYSICAL DATA FOR MATERIAL
Physical State Liquid
Density 0.85 Boiling point 189-192°C Solubility in water at 25°C Insoluble Vapour Density 5.1 SECTION-IV: FIRE & EXPLOSION HAZARD OF MATERIAL
Flash Point 54 °C
Means of extinction Foam, Carbon Dioxide, Dry Chemical Lower explosive limit(by volume) Not Available Upper explosive limit(by volume) Not Available SECTION-V: REACTIVITY DATA
Chemical stability Stable at room temperatures under normal storage conditions Reactive and under what conditions Excess heat, Oxidisers Incompatibility to other substances Oxidising agents Hazardous products of decomposition Carbon Monoxide , Carbon dioxide, fumes SECTION-VI: TOXICOLOGICAL PROPERTIES OF MATERIAL
Route of entry Inhalation, Ingestion Effects of chronic exposure of materials Possible Kidney Damage Effects of acute exposure to material Depression of CNS, Eye and Respiratory system irritation Exposure limit Not specified Effect on Skin & Eye Skin and eye irritant SECTION-VII : PREVENTIVE MEASURES
Gloves (Specify) Rubber Eyes (Specify) Safety Goggles Clothing(Specify) Overalls Footwear (Specify) Protective footwear Others(Specify) PVC overall with hood and visor Engineering Controls Effective, Ventilation. No physical contact Leak & spill containment procedures recommended Clean immediately and absorb spill with inert material such as sand. Remove all sources of ignition Special shipping information IMCO Class III Storage requirement Cool, dry place with ventilation SECTION-VIII: FIRST AID MEASURE
First aid measures Inhalation - if breathing is difficult give oxygen. Do NOT use mouth to mouth respiration. Get Medical aid. If swallowed, do not induce vomiting get medical aid; wash from skin and eyes. The material contained is given in good faith and is accurate to the best of our knowledge. K.K. Poonja & Sons do not assume any liability for the information contained herein.
